MicroPython WiFi Manager to configure and connect to networks

• Installation
  • Install required tools
  • Flash firmware
  • Upload files to board
    • Install package
    • General
    • Hook the WiFi Manager boot logic
    • Specific version
    • Test version
    • Manually
      • Upload files to board
      • Install additional MicroPython packages
• Usage

Python3 must be installed on your system. Check the current Python version with the following command

python --version
python3 --version

Depending on which command Python 3.x.y (with x.y as some numbers) is returned, use that command to proceed.

python3 -m venv .venv
source .venv/bin/activate

pip install -r requirements.txt

Test both tools by showing their man/help info description.

esptool.py --help
rshell --help

To flash the micropython firmware as described on the micropython firmware download page, use the esptool.py to erase the flash before flashing the firmware.

esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART erase_flash
esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 460800 write_flash -z 0x1000 esp32-20210623-v1.16.bin

If the Micropython board is equipped with an external PSRAM chip, the esp32spiram-20210623-v1.16.bin can also be used for ESP32 devices. If there is no external PRSAM only the non SPIRAM version is working.

Connect your MicroPython board to a network

import network
station = network.WLAN(network.STA_IF)
station.active(True)
station.connect('SSID', 'PASSWORD')
station.isconnected()

Install the latest package version of this lib on the MicroPython device

import mip
mip.install("github:brainelectronics/micropython-esp-wifi-manager")

# maybe install the dependencies manually afterwards
# mip.install("github:brainelectronics/micropython-modules")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
upip.install('micropython-esp-wifi-manager')
# dependencies will be installed automatically

The boot.py and main.py files of this package are installed into /lib of the MicroPython device by mip. They are fully functional and without any other dependencies or MicroPython port specific commands. Simply add the following line to the boot.py file of your device. The following commands are not working if this package got installed by upip

import wifi_manager.boot

And also add this line to your main.py, before your application code

import wifi_manager.main

Install a specific, fixed package version of this lib on the MicroPython device

import mip
# install a verions of a specific branch
mip.install("github:brainelectronics/micropython-esp-wifi-manager", version="feature/support-mip")
# install a tag version
mip.install("github:brainelectronics/micropython-esp-wifi-manager", version="1.7.0")

Install a specific release candidate version uploaded to Test Python Package Index on every PR on the MicroPython device. If no specific version is set, the latest stable version will be used.

import mip
mip.install("github:brainelectronics/micropython-esp-wifi-manager", version="1.7.0-rc5.dev22")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
# overwrite index_urls to only take artifacts from test.pypi.org
upip.index_urls = ['https://test.pypi.org/pypi']
upip.install('micropython-esp-wifi-manager')

See also brainelectronics Test PyPi Server in Docker for a test PyPi server running on Docker.

Copy the module(s) to the MicroPython board and import them as shown below using Remote MicroPython shell

Open the remote shell with the following command. Additionally use -b 115200 in case no CP210x is used but a CH34x.

rshell -p /dev/tty.SLAB_USBtoUART --editor nano

Create compressed CSS and JS files as described in the simulation static files README to save disk space on the device and increase the performance (webpages are loading faster)

mkdir /pyboard/lib/
mkdir /pyboard/lib/microdot/
mkdir /pyboard/lib/utemplate/
mkdir /pyboard/lib/wifi_manager/
mkdir /pyboard/lib/static/
mkdir /pyboard/lib/static/css
mkdir /pyboard/lib/static/js

cp static/css/*.gz /pyboard/lib/static/css
cp static/js/*.gz /pyboard/lib/static/js
# around 24kB compared to uncompressed 120kB

# optional, not used so far
# mkdir /pyboard/lib/static/js
# cp static/js/*.gz /pyboard/lib/static/js
# around 12kB compared to uncompressed 40kB

mkdir /pyboard/lib/templates/
cp templates/* /pyboard/lib/templates/
# around 20kB

cp wifi_manager/* /pyboard/lib/wifi_manager/
cp microdot/* /pyboard/lib/microdot/
cp utemplate/* /pyboard/lib/utemplate/
cp main.py /pyboard
cp boot.py /pyboard
# around 40kB

As this package has not been installed with upip additional modules are required, which are not part of this repo.

Connect the board to a network and install the package like this for MicroPython 1.20.0 or never

import mip
mip.install("github:brainelectronics/micropython-modules")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
upip.install('micropython-brainelectronics-helper')

After all files have been transfered or installed open a REPL to the device.

The device will try to load and connect to the configured networks based on an encrypted JSON file.

In case no network has been configured or no connection could be established to any of the configured networks within the timeout of each 5 seconds an AccessPoint at 192.168.4.1 is created.

A simple Picoweb webserver is hosting the webpages to connect to new networks, to remove already configured networks from the list of connections to establish and to get the latest available networks as JSON.

This is a list of available webpages

To leave from the Webinterface, just press CTRL+C and wait until all threads finish running. This takes around 1 second. The device will return to its REPL